Zebra AM16629-1 Manual de usuario

AM16629-1 Rev. C pg. 1 of 12INSTALLATION INSTRUCTIONSREAD THIS MANUAL CAREFULLY! FAILURE TO INSTALL THISEQUIPMENT PER THESE INSTRUCTIONS WILL VOID T

pg. 10 of 12 AM16629-1 Rev. CAttaching the Fanfold BinIf the printer will be using fanfold media, you must install the fanfold bin to the MobileMount

AM16629-1 Rev. C pg. 11 of 12Connect the Printer• Plug the output cable from the Charger to the battery connection on the printer. (Re-fer to the QL

AM16629-1 rev. C 8/12/2003TECHNICAL SUPPORTU.S. ONLYZebra maintains a help line for questions involving installation of the MMQ4 Mobile Mount.Please

pg. 2 of 12 AM16629-1 Rev. CSPECIAL NOTICESThe following notices emphasize certain information in the guide. Each serves a specialpurpose and is disp

AM16629-1 Rev. C pg. 3 of 12INTRODUCTIONNOTE: Zebra technologies Corporation is not liable for personal injury or damage toany equipment caused by t

pg. 4 of 12 AM16629-1 Rev. CTools Required• An electrical drill, drill bits 1/4”(6 mm))• Taps-1/4-20 and #6-32 (M6 and M3).• Common hand tools.Refere

AM16629-1 Rev. C pg. 5 of 12Figure 1Standard Mounting Configurationsheight width depth depth w/ bin21.32” 11.63” 8.2” 11.07”54.2 29.5 20.83 28.1heigh

pg. 6 of 12 AM16629-1 Rev. CIt is important to leave a free zone around the printer to allow loading of paper and routinecleaning of the print head.

AM16629-1 Rev. C pg. 7 of 1211.00"8.63"2.01"2.75"1.82"0.31"0.31" Dia. x40.31"Use a 1/4” (6 mm) drill bit to m

pg. 8 of 12 AM16629-1 Rev. CPRINTER INSTALLATIONPrinter PreparationPrepare the printer for installation by doing the following:• If your printer has

AM16629-1 Rev. C pg. 9 of 12Printer InstallationThe QL 420 Printer can now be installed in the Mobile Mount. Secure the printer to theMobile Mount