Zebra 96XiIII Plus Especificaciones descargar pdf (Pagina 15)

Configuration

After you have completed the Calibration, you

may set printer parameters for your application

using the front panel display and the five keys

directly below it.

The Configuration Procedure in Table 2 contains

the information you will need to get your printer

up and running, but it is not comprehensive. Refer

to the user’s guide for more information.

Enter the Configuration Mode by pressing

at the PRINTER READY display.

Follow the procedure in Table 2. You may exit the

Configuration Mode at any time by pressing

(follow the instructions at the end of the

table).

•

An asterisk (*) in the upper left-hand corner of

the display indicates that you have changed this

setting from what is currently stored in

memory.

•

To change a parameter, use the left and right

black oval keys just below the display screen:

Increases value, answers “yes”,

indicates “on”, or displays the next selection.

Decreases value, answers “no”,

indicates “off”, or displays the previous selection.

English 87

1. Press: 2. Display Shows: Action/Explanation:

—

PRINTER READY Normal printer operation.

DARKNESS

Press the oval keys to change the darkness of printing.

CAUTION: Set the Darkness to the lowest setting that provides good

print quality. Darkness set too high may cause ink smearing and/or it

may burn through the ribbon.

To change the front panel display language (skip if the display is already in your preferred language):

LANGUAGE

Press the oval keys to change the language of the front panel display

text.

DARKNESS

Press the oval keys to change the darkness of printing.

CAUTION: Set the Darkness to the lowest setting that provides good

print quality. Darkness set too high may cause ink smearing and/or it

may burn through the ribbon.

TEAR OFF

Press the oval keys to change the position of the media over the tear

bar after printing. Adjust this setting if labels are being torn in the

wrong place.

PRINT MODE

Press the oval keys to select Tear-Off, Peel-Off, Cutter, or Rewind

Mode. Make sure you choose a mode that is available for your

specific printer because some of these modes require special options.

MEDIA TYPE

Press the oval keys to select continuous or non-continuous media

type. Non-continuous: the printer automatically determines the label

length by sensing the notch, gap, web, or black mark between labels.

Continuous: you must include a label length instruction in your label

format (^LLxxxx if you are using ZPL or ZPL II).

Table 2

E:\jobs\EH91 Zebra\XiIII\XiIII-gb.vp

Wednesday, December 15, 1999 8:57:59 AM

Color profile: Disabled

Composite Default screen

1 2 ... 10 11 12 13 14 15 16 17 18

Comentarios a estos manuales

Sin comentarios

Zebra 96XiIII Plus Especificaciones Pagina 15

Comentarios a estos manuales

Relacionado con productos y manuales para Impresoras De Etiquetas Zebra 96XiIII Plus