Zebra Printers Manual de usuario Pagina 68

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 69
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 67
Step 3—Replace
the Cutter
Align the left edges of the bezel and printer.
Connect the bezel by snapping down into place.
Step 4—Check
the Cutter
Connect the power cord and interface cable.
Turn the printer on. Tap the Feed button. The
printer should feed one label then cut the liner.
980181-001 Rev.C 61
Using the Media Cutter
Vista de pagina 67
1 2 ... 63 64 65 66 67 68 69

Comentarios a estos manuales

Sin comentarios