Zebra GC420t Guía de usuario descargar pdf (Pagina 26)

Loading Roll Media

P1039498-001 GC420t™ User Guide 8/15/2011

4. Pull the media so that it extends out of the front of the printer. Verify the roll turns freely.

The roll must not sit in the bottom of the media compartment. Verify that the media’s

printing surface is facing up.

5. Push the media under both of the media guides. Close the media guides by turning the

media

guide adjustment knob to the front. The guides should just touch, but not restrict,

the edges of the media.

6. Unless you need to load transfer ribbon, close the top cover. Remember that you need to

release the cover lock, lower the top cover, and press down until the

latches snap into

place.

7. If printer power is on, press the Feed Button to feed media. Otherwise, wait to turn on the

printer and complete the printer ‘Getting Started’ instructions in this chapter.

Under Media

Guides

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 115 116

Sin comentarios

Zebra GC420t Guía de usuario Pagina 26