Zebra LP 2824 Guía de usuario Pagina 38

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 56
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 37
Direct-Thermal LP Model
Before following the steps in this procedure, open the printer by
pulling the release latches forward then lifting the top cover.
Removal
1. Unsnap the bracket from the lid.
2. Slide the print head to one side until it
is free of the lid.
3. Use a #1 Phillips driver to loosen the
screw that holds the ground wire to
the bracket; pull the wire away from
the bracket.
4. Unplug both bundles of print head
wires from the left and right
connectors.
30 980481-001A
MOVIE
Vista de pagina 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 55 56

Comentarios a estos manuales

Sin comentarios