Zebra TLP 2844-Z Guía de usuario descargar pdf (Pagina 32)

Printing on Fan-Fold Media

Printing on fan-fold media requires you to

set both the media hangers and the media

guides in position.

1. Open the top cover.

2. With a sample of your media, adjust

the media hangers to the width of the

media. The hangers should just touch,

but not restrict, the edges of the

media.

3. Tighten the screw using a small

Phillips driver #1.

4. With a sample of your media, adjust

the guides to the width of the media.

The guides should just touch, but not

restrict, the edges of the media.

5. Insert the media through the slot at the

rear of the printer.

6. Run the media between the hangers

and guides.

7. Close the top cover.

24 980410-001 Rev. B

Lock-down

Screw

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 61 62

Comentarios a estos manuales

Sin comentarios