Zebra TLP2824 Plus Guía de usuario descargar pdf (Pagina 98)

Troubleshooting

Using the Printer’s Reset Button

980643-001 Rev. A TLP 2824 Plus™ User Guide 3/31/09

Using the Printer’s Reset Button

The printer’s reset button can restore the printer or network (the internal print server) to

factory default configuration.

By pressing and holding the reset button for one (1) or more seconds, the printer will enter a

reset sequence and the status light will begin blinking every second until released. Releasing

the button at the appropriate time tells the printer which reset function to perform.The table

below describes the reset modes and sequence timing.

In order to reset the printer and network using the reset button, you must perform two separate

reset actions: a printer reset (press and hold the button 1-5 seconds) and a network reset (press

and hold the button 6-10 seconds). See the Feed Button Modes on page 84 to reset both printer

and it’s print server at the same time using the 4-flash Feed Button mode.

Table 2 •

Seconds Description

0-1 No Action

1-5 Printer — The printer shall perform a factory default reset. Upon

completion of the factory default reset the printer shall

automatically print a configuration label and a network label (if

present).

6-10 Network Option (Internal Print server) — the printer shall drop

connection to the network and a network factory default reset

shall occur. Upon completion of the network default reset the

printer shall automatically print a configuration label and a

network label. If no Ethernet is installed in the printer the printer

shall perform no action if the button is pressed 5 or more seconds.

10 or more Exits the reset factory defaults function without resetting the

printer or changing the printer settings to the factory defaults.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 104

Sin comentarios

Zebra TLP2824 Plus Guía de usuario Pagina 98