Zebra 170PAX2 Series Manual de usuario descargar pdf (Pagina 7)

05/25/2005 3 47867L-001 Rev. A

RTC ZPL II Commands

RTC General Information

The Real Time Clock commands are only applicable if the Real Time Clock option is installed

in the printer. For those printers with an LCD front panel display, additional front panel

configuration parameters are also included.

The ZPL II Field Clock

^FC command is used to specify the clock-indicator character for the

primary, secondary, and third clocks. This command must be included within each label field

command string whenever the date or time clock values are required within the field. No date

or time clock information can be printed in a label field unless this command is included. The

^FC command can now be combined with the ^SN command in V60.13.0.10 and above.

A clock-indicator can be any printable character except the ZPL II Format Prefix, Control

Prefix, or Delimiter characters. The default value for the primary clock-indicator is the percent

sign

%. The secondary and tertiary clock-indicators have no defaults and must be specified in

order for that clock to be used.

The Field Data

^FD command has been expanded to recognize the clock-indicators and

associated command characters, and to replace them during the printing process with the

corresponding time or date parameter. For example, if the primary clock-indicator is the

percent sign

%, then during printing, the character sequence %H in the ^FD statement would be

replaced by the 2-digit current hour.

The name of the day of the week, the name of the month, and the AM or PM designation can

also be inserted in place of a specific clock-indicator/command character sequence. See

Table 1 on page 4 for the list of command characters and their functions.

Note • If the Real Time Clock is not installed, or the ^FC command has not preceded the

^FD statement, no replacement would occur. In this case, the characters %H would print as

text on the label.

Note • V60.13.0.12 firmware, greatly enhances the RTC.

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Sin comentarios

Zebra 170PAX2 Series Manual de usuario Pagina 7