
Rev. 1.00
Mobile Printer User’s Manual
9. Appendix
9-1 Specifications
Printer specifications are subject to change without notice.
90 mm/sec (Receipt Paper)
Font A: 12 × 24 Font B: 9 × 17 Font C: 9 × 24
English: 95
Expanded Graphics: 128 × 33 pages
International: 32
1 Dimension: UPC-A, UPC-E, Code 39, Code 93, Code 128,
EAN-8, EAN-13, ITF, Codabar
2 Dimension: PDF417, Data Matrix, MaxiCode, QR code
Windows XP(32bit/64bit) / WEPOS / 2003 Server(32bit/64bit) /
VISTA(32bit/64bit) / 2008 Server(32bit/64bit) / 7(32bit/64bit) /
8(32bit/64bit)
Windows XP / WEPOS / 2003 Server / VISTA / 2008 Server / 7 / 8 /
CE 3.0 and later
Paper End, Paper Cover Open
57.5 ± 0.5 mm (2.26” ± 0.2”)
0.06 ~ 0.1 mm (0.0024”~0.0039")
Rechargeable up to 500 times
Serial/USB, Bluetooth Class2 V3.0 + EDR
Wireless Lan 802.11 b/g
* Communication is enabled only for devices with Bluetooth
or Wireless LAN function.
Voltage: 100 ~ 250 VAC Current: 0.5A (Max. at 110VA)
Voltage: 8.4 VDC Current: 0.8A
* Charging current and charging time may depend on the type
(option) of the charger.
Voltage: 7.4 VDC (Available 8.4 ~ 6.8VDC) Capacity: 1200 mAh
Printer: -15~50℃ (5~122℉)
Battery: 0~40℃ (32~104℉)
Battery discharge: -20~60℃ (-4~140℉)
Printer: 10~80% RH (No condensation)
Battery: 20~70% RH(Non-condensing, refer to the tempera
ture conditions on page 8)
79.5mm × 126.7mm × 43.6mm (3.13″ × 4.99″ × 1.72″)
Printer : 197g (0.43lbs)
Printer + Battery : 250g (0.55lbs)
Printer + Battery + Paper : 307g (0.68lbs)
Package: approx. 1000g (2.2lbs)
Battery, Battery Charger, Belt Strap, Paper
Battery(with external power contacts), Case, Protective Case,
Belt Clip, Vehicle Holder, Interface Cable, Cigarette Lighter Jack
Charger, Shoulder Strap, Quad Cradle, Quad Charger, Single
Cradle, Battery Cradle
* This equipment is indooruse and all the communication hiring are limited to inside of the building.
* The switch is the disconnecting device. Turn off switch from any hazard.
Comentarios a estos manuales