
jap10
21
P320i Card Gate Thickness
• Card Thickness Control Lever :
This item is operated by the user to prevent more
than one card feeding into the printer at the same
time and causing a jam.
• Open Cover, and adjust lever to correct position.
Repeat for different card thickness. (Factory
setting is for 30mil (0.762mm) card thickness.
A - 60mil (1.524mm) to 50mil (1.27mm)
B - 40mil (1.016mm)
C - 30mil (0.762mm)
*For other card thickness, start lever at lowest
position and move up until cards feed.
Comentarios a estos manuales