Zebra LI 72 Guía de usuario descargar pdf (Pagina 60)

QL Plus Series User Guide

Troubleshooting Topics

1. No power

•Checkthatbatteryisinstalledproperly.

•Rechargeorreplacebatteryasnecessary.

 Alwaysdisposeofbatteriesproperly.RefertoAppendixEformore

informationonproperbatterydisposal.

2. Media does not feed:

•Besureprintheadisclosedandlatched.

•Checkspindleholdingmediaforanybinding.

•Ifunitisequippedwithlabelpresencesensor:  

Ensure most recently printed label is removed.

Also ensure label sensor is not blocked.

3. Poor or faded print or ﬂashing:

•Cleanprinthead.

•Checkbatteryandrechargeorreplaceasnecessary.

Always dispose of batteries properly. Refer to Appendix D

for more information on proper battery disposal.

•Checkqualityofmedia.

4. Partial or missing print:

•Checkmediaalignment

•Cleanprinthead.

•Ensureprintheadisproperlyclosedandlatched.

5. Garbled print:

•Checkbaudrate.

6. No print:

•Checkbaudrate.

•Replacebattery.

•Checkcabletoterminal.

•EstablishRFLink(Wirelessunitsonly)and/orrestoreLAN

associativity (Printers with WLAN radios only).

•Invalidlabelformatorcommandstructure.Placeprinterin

Communications Diagnostic (Hex Dump) Mode to diagnose

problem.

7. Reduced battery charge life

•Checkbatterydatecode—ifbatteryisonetotwoyears

old, short charge life may be due to normal aging.

•Reconditionbattery.

•Replacebattery.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 85 86

Sin comentarios

Zebra LI 72 Guía de usuario Pagina 60