Zebra MZ series Especificaciones descargar pdf (Pagina 16)

MZ Series User Guide

Loading the Media (All models)

1. Open the printer: Refer to Figure 6.

• Press the latch release button on the top of the printer as

shown at “1” below. The media cover will flip open auto-

matically revealing the media compartment.

2. Load the media: Refer to Figure 7

• Insert the roll of media into the media compartment.

Ensure that the media pulls off the core in the direction

shown in Figure 6.

3. Close the Media Cover: Refer to Figure 8.

• Pull a short length of media out of the printer

• Close the Media Cover firmly and ensure it is securely

latched on both sides..

• Turn on the printer and press the Feed button.

The printer will advance media until the Feed button is re-

leased. Verify the media is feeding properly and without

binding or skewing sideways.

Figure 6: Opening the MZ Printer (MZ 220 shown)

continued

Media Compartment

Latch Release

Button

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 52 53

Sin comentarios

Zebra MZ series Especificaciones Pagina 16