Zebra QLn420 Guía de usuario descargar pdf (Pagina 60)

QLn Series User Guide

ASCII information will be created and stored in the printer’s

memory. It can be viewed, “cloned” or deleted using the Net

Bridge application. (Refer the Net Bridge documentation for

more information.)

To terminate the Communications Diagnostics Mode and re-

turn the printer to normal operations:

1. Turn the printer OFF.

2. Wait 5 seconds.

3. Turn the printer ON.

Contacting Technical Support

If the printer fails to print the configuration label, or you en-

counter problems not covered in the Troubleshooting Guide,

contact Zebra Technical Support. Technical Support ad-

dresses and phone numbers for your area can be found in

Appendix D of this manual. You will need to supply the fol-

lowing information:

• Model number and type (e.g. QLn320)

• Unit serial number (Found on the large label on the back of the

printer, also found in the configuration label printout.

• Product Configuration Code (PCC) (15 digit number found on the

label on the back of the unit)

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 102 103

Sin comentarios

Zebra QLn420 Guía de usuario Pagina 60