Zebra ZE500 Guía de usuario Pagina 90
- Pagina / 170
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Printer Configuration and Adjustment
Changing Printer Settings
90
P1051584-002 8/23/12
IP Protocol Set the IP Resolution Method
This parameter tells if the user (permanent) or the server (dynamic) selects the
IP
address. If a dynamic option is chosen, this parameter tells the method(s) by which
the wired or wireless print server receives the IP address from the server.
Accepted values:
• ALL
• GLEANING ONLY
• RARP
• BOOTP
• DHCP
• DHCP & BOOTP
• PERMANENT
Related ZPL command(s):
^ND
SGD command used: Wired: internal_wired.ip.protocol
external_wired.ip.protocol
Wireless: wlan.ip.protocol
Control panel menu item: IP PROTOCOL on page 36
Printer web page:
View and Modify Printer Settings >
Network
Communications Setup >
TCP/IP
Settings > IP Protocol
IP Address View or Set the Printer’s IP Address
View and, if necessary, change the printer’s IP address.
Changes to this setting are saved only if IP PROTOCOL is set to PERMANENT. To
allow any saved changes to take effect, reset the print server (see
Reset Network
on page 92).
Accepted values:
000 to 255 for each field
Related ZPL command(s):
^ND
SGD command used: Wired: internal_wired.ip.addr
external_wired.ip.addr
Wireless: ip.addr, wlan.ip.addr
Control panel menu item: IP ADDRESS on page 36
Printer web page:
View and Modify Printer Settings >
Network
Communications Setup >
TCP/IP
Settings > IP Address
Table 8 • Network Settings (Continued)
- User Guide 1
- DECLARATION OF CONFORMITY 3
- Compliance Information 4
- Contents 5
- About This Document 9
- Who Should Use This Document 10
- Contacts 11
- Document Conventions 12
- Introduction 13
- Print Engine Orientation 14
- Print Engine Components 15
- POWER PAUSE STATUS DATA 16
- Default Password Value 20
- Control Panel Display 21
- • the non-resettable counter 26
- 3. Do you want to continue? 28
- PERMANENT 36
- Types of Media 39
- Printer Setup and Operation 40
- Ribbon Overview 41
- Adhesive Test 42
- Ribbon Scratch Test 42
- Printer Setup and 43
- Operation 43
- Handling the Print Engine 44
- Remove the metal spacer 46
- To Store the Print Engine 47
- To Ship the Print Engine 47
- Print Engine Installation 48
- 9.648 in 50
- (245 ± 0.1 mm) 50
- 0.445 in 50
- (11.3 mm) 50
- 16.62 in. (422.1 mm) 51
- Data Cables 58
- 115 V AC 59
- 230 V AC 59
- Power Cord Specifications 60
- Load Ribbon and Media 62
- Loading Media 65
- 19. Close the media door 69
- Printer Configuration 71
- Adjustment 71
- Changing Printer Settings 72
- Print Settings 73
- Applicator 75
- • ZE500-4 203 dpi: 832 dots 77
- • ZE500-4 300 dpi: 1228 dots 77
- • ZE500-6 203 dpi: 1344 dots 77
- • ZE500-6 300 dpi: 1984 dots 77
- ~JS when received 79
- • ENABLED 80
- • DISABLED 80
- Directory Listing 88
- Network Settings 89
- Print Server Settings > 92
- Print Server Settings 92
- Language Settings 93
- • ZPL II 94
- Sensor Settings 95
- Port Settings 96
- ZEBRA response messages are 98
- ZEBRA is selected, the print 98
- DSR/DTR for host 98
- LOAD BACKING 99
- P1051584-002 8/23/12 100
- REMOVE RIBBON 101
- CALIBRATING 101
- PLEASE WAIT 101
- RELOAD ALL 101
- Close the media door 102
- Remove Used Ribbon 103
- Adjust the Sensors 104
- Reflective Media Sensor 105
- Ribbon Sensor 105
- Toggle Positioning 106
- I) the printer.) 107
- Printhead Pressure Adjustment 108
- Routine Maintenance 111
- CLEAN HEAD NOW appears 112
- Clean the Media Compartment 113
- 7. Close the media door 114
- Lubrication 115
- Troubleshooting 117
- Printing Issues 118
- Ribbon Problems 121
- Error Messages 122
- 1) is likely 123
- O) the print engine 124
- I) the print engine 124
- Display/ 126
- Print Engine Condition 126
- Communications Problems 127
- Miscellaneous Issues 128
- Print Engine Diagnostics 130
- CANCEL Self Test 131
- PAUSE Self Test 132
- FEED Self Test 133
- Print Quality Description 134
- FEED + PAUSE Self Test 136
- CANCEL + PAUSE Self Test 136
- FE indicates a framing error 137
- PE indicates a parity error 137
- NE indicates noise 137
- Sensor Profile 138
- MEDIA (3) for the media 139
- Specifications 141
- General Specifications 142
- Printing Specifications 143
- Ribbon Specifications 143
- Media Specifications 144
- Applicator Interface Board 145
- Reconfiguration 145
- Remove Power and Data Cables 146
- ) off of the print engine 147
- 8/23/12 P1051584-002 149
- The installation is complete 155
- Glossary 157
- 8/23/12 P1051584-002 161
Relacionado con productos y manuales para Impresión y escaneo Zebra ZE500
Impresión y escaneo Zebra GX420t Guía de usuario
(108 paginas)
(108 paginas)
Impresión y escaneo Zebra EPL2 Especificaciones
(138 paginas)
(138 paginas)
Impresión y escaneo Zebra KR203 Especificaciones
(36 paginas)
(36 paginas)
Impresión y escaneo Zebra TLP 2824 Guía de usuario
(60 paginas)
(60 paginas)
Impresión y escaneo Zebra P120i Manual de usuario
(76 paginas)
(76 paginas)
Impresión y escaneo Zebra 170PAX2 Series Guía de usuario
(100 paginas)
(100 paginas)
Impresión y escaneo Zebra LI 72 Guía de usuario
(2 paginas)
(2 paginas)
Impresión y escaneo Zebra P520 Manual de usuario
(64 paginas)
(64 paginas)
Impresión y escaneo Zebra 170PAX4 Guía de usuario
(164 paginas)
(164 paginas)
Impresión y escaneo Zebra Z6Mplus Guía de usuario
(142 paginas)
(142 paginas)
Impresión y escaneo Zebra EM 220 Manual de servicio
(53 paginas)
(53 paginas)
Impresión y escaneo Zebra Z6M Manual de usuario
(27 paginas)
(27 paginas)
Impresión y escaneo Zebra RW 420 Guía de usuario
(84 paginas)
(84 paginas)
Impresión y escaneo Zebra 110PAX4 Guía de usuario
(164 paginas)
(164 paginas)
Impresión y escaneo Zebra P110m Manual de usuario
(68 paginas)
(68 paginas)
Impresión y escaneo Zebra TTPM3 Especificaciones
(112 paginas)
(112 paginas)
Impresión y escaneo Zebra 105SL Plus Guía de usuario
(180 paginas)
(180 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.097 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales