Zebra ZXP Series 7 Manual de usuario descargar pdf (Pagina 125)

E: CardSense Single Card Feed Mode

P1058486-002 Zebra ZXP Series 3 Card Printer User’s Manual 121

Step 7. Remove the Cleaning Roller from the Cleaning Cartridge, and then remove the

protective wrapper from the Cleaning Roller,

Step 8. Place the Cleaning Roller in the Cartridge, and close the lid.

Step 9. The Cleaning Cartridge is held in place by two clips. While gently squeezing the

clips inward, press the cartridge into place. It will seat with a click.

Step 10. Insert the Ribbon Cartridge with the cleaning roller facing down, so the gears on the

ends of the rollers fit into the appropriate slots.

Step 11. Close the printer lid, and push down until you hear an audible click. If you can not

close the lid, the cleaning cartridge or the ribbon cartridge may be installed wrong.

Step 12. Place the printer power switch in the ON ( | ) position.

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 133 134

Sin comentarios

Zebra ZXP Series 7 Manual de usuario Pagina 125