Zebra S400 Guía de usuario descargar pdf (Pagina 91)

Configuration

Control Panel Parameters

3/27/07 ZM400/ZM600 User Guide 79695L-001 Rev. A

ZPL and XML only Select Format Convert

Selects the bitmap scaling factor. The first number is the original dots per

inch (dpi) value; the second, the dpi to which you would like to scale.

Default Value: NONE

Selections: NONE, 150 → 300, 150 → 600, 200 → 600, 300 → 600

To change the value shown:

1. Press SELECT to select the parameter.

2. Press PLUS (+) or MINUS (-) to scroll through the options.

3. Press

SELECT to accept any changes and deselect the parameter.

Select Idle Display

This parameter selects the LCD options for the real-time clock.

Note • If the default value is not selected, pressing PLUS (+) or

MINUS (-) briefly displays the firmware version of the printer.

Default Value: FIRMWARE (FW) VERSION

Selections: MM/DD/YY (24HR), MM/DD/YY (12HR), DD/MM/YY

(24HR), DD/MM/YY (12HR), FW VERSION

To change the value shown:

1. Press SELECT to select the parameter.

2. Press PLUS (+) or MINUS (-) to scroll through the options.

3. Press

SELECT to accept any changes and deselect the parameter.

Table 12 • Printer Parameters (Page 22 of 24)

Parameter

Action/Explanation

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 145 146

Sin comentarios

Zebra S400 Guía de usuario Pagina 91