Zebra Z6M Manual de usuario descargar pdf (Pagina 55)

Zebra Z4M/Z6M Printers User’s Guide 47

Display Shows Action/Explanation

PARITY

Setting Parity: Press the INCREMENT (+) or DECREMENT (–) key to display

other choices.

Default: Even

Selections: Even, odd, none

The parity of the printer must match the parity of the host computer for accurate

communications to take place. Select the parity that matches the one being

used by the host computer.

HOST HANDSHAKE

Setting Host Handshake: Press the INCREMENT (+) or DECREMENT (–) key

to display other choices.

Default: XON/XOFF

Selections: XON/XOFF, DTR/DSR

The handshake protocol of the printer must match the handshake protocol of the

host computer for communications to take place. Select the handshake protocol

that matches the one being used by the host computer.

PROTOCOL

Setting Protocol: Press the INCREMENT (+) or DECREMENT (–) key to

display other choices.

Default: None

Selections: None, Zebra, ACK_NACK

Protocol is a type of error checking system. Depending on the selection, an

indicator may be sent from the printer to the host computer signifying that data

has been received. Select the protocol that is requested by the host computer.

Further details on protocol can be found in the ZPL II Programming Guide

Volume I.

NOTE: Zebra is the same as ACK_NACK except that with Zebra the response

messages are sequenced.

NOTE: If Zebra is selected, printer must use DTR/DSR host handshake

protocol.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 111 112

Sin comentarios

Zebra Z6M Manual de usuario Pagina 55