Zebra Z6M Manual de usuario descargar pdf (Pagina 78)

70 Zebra Z4M/Z6M Printers User’s Guide

(UURUFRQGLWLRQ³+($'23(1

(UURUFRQGLWLRQ³5,%%21,1

:DUQLQJ³+($'29(57(03

:DUQLQJ³+($'81'(57(03

Problem Solution

The printhead is not fully closed. Close the printhead.

The ribbon is loaded incorrectly; it is covering

the head open sensor.

Correctly align the ribbon with the guide mark on the ribbon

guide plate before closing the printhead assembly. See

“Ribbon Loading” on page 34.

Problem Solution

Print method is incorrectly set.

Via the front panel, locate the “PRINT METHOD” menu item

(page 42) and select thermal transfer mode.

Ensure that the printer driver and/or software settings are

correctly set (if applicable).

The ribbon is loaded.

Remove the ribbon and set the printer to direct thermal

mode. (See “PRINT METHOD” on page 42.)

Ensure that the printer driver and/or software settings are

correctly set (if applicable).

Problem Solution

The printhead is over temperature.

Allow the printer to cool. Printing automatically resumes

when the printhead elements cool to an acceptable

operating temperature.

Problem Solution

The printhead is under temperature.

Continue printing while the printhead reaches the correct

operating temperature.

The environment may be too cold for proper printing.

Relocate the printer to a warmer area.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 111 112

Sin comentarios

Zebra Z6M Manual de usuario Pagina 78