Zebra R-2844Z Guía de usuario descargar pdf (Pagina 48)

^RS – RFID Setup

Use this command to set up RFID operation and error handling. You can

move the tag into an effective area to read or write.

The format for the ^RS instruction is:

^RSt,p,v,n,e

where the parameters are:

t = tag type

Default value: 1 –Auto Detect (automatically determine the

tag type, by querying the tag)

Other values:

2- Texas Instruments Tag-it™ tags

3- Philips I•Code tags

4- Inside Technologies Picotag® 2K

5- ISO 15693 tag (see note)

6- EPC Tag (13.56 MHz)

p = read/write position of a transponder in vertical (Y-axis) in

dot-rows from the top of the label.

Default value: label length minus eight dot-rows

Other values: zero to label length

Set to zero ( 0 ) so that the media will not move; that is, the

transponder is already in the effective area.

v = length of void print out in vertical (Y-axis) dot-rows.

Default value: label length

Other values: zero to label length

n = number of labels to try in case of read/encode failure

Default value: 3

Other values: 1 to 10, number of labels

e = error handling

Default value: 'N' (no action)

Other values:

'P'- printer pauses

'E'- printer goes into error mode

40 980476-001A

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 85 86

Sin comentarios

Zebra R-2844Z Guía de usuario Pagina 48