Zebra ZP 450 Guía de usuario descargar pdf (Pagina 29)

Getting Started

Hooking Up the Printer and Computer

12/17/07 ZP 450™ User Guide 980546-003 B

Communicating with the Printer

Universal Serial Bus (USB) Communications

The printer is a terminal device when using a universal serial bus interface. You can refer to

the Universal Serial Bus Specification for details regarding this interface.

USB Printer Detection and Windows

operating systems.

Windows 98 Second Edition, Windows 2000 and Windows XP and later operating systems

support the USB communications with printers. The Zebra Windows Driver supports your

printer in these operating systems.

These operating systems automatically detect the printer when connected via the USB

interface. The operating system automatically starts a “Add new hardware’ wizard when

connecting the printer for the first time to the PC. Close the wizard. Install the Zebra Windows

Driver found on the user’s CD. Select the USB port and media size (closest match). Click on

the ‘Print test page’ button to verify a successful installation.

The Windows operating system will detect and relink a previously installed printer if it is

reconnected to the USB interface or power is turned on after the PC has finished it’s restart of

the operating system. Ignore the new device detected warnings and close the Task bar prompts.

Wait several seconds for the operating system to match the printer to the driver software. The

warnings will quit and the printer now should be ready to begin printing.

Serial Port and Windows

operating systems

The Windows operating system default settings for the serial port communication closely

match the printer’s defaults settings with one exception; the data Flow Control settings. The

Windows default data Flow Control setting is NONE. The printer requires data Flow Control

set to Hardware.

Note • The printer does not support Windows Serial Port Plug and Play (PnP) device

detection at this time.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 69 70

Sin comentarios

Zebra ZP 450 Guía de usuario Pagina 29