Zebra ZXP Series 1 Manual de usuario descargar pdf (Pagina 15)

2: Installation and Setup

Unpacking the Printer

P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 7

Step 5. Lift the Printer out of the carton by holding it with both hands.

Step 6. Place the Printer in a location that meets the following requirements:

• A reasonably dust-free and dirt-free environment.

• Flat surface at least 40 in (1016 mm) x 12 in (305 mm) that can support the

weight of the Printer; additional space preferred. Allow a 4-inch clearance,

minimum, on all sides.

• Vertical clearance at least 32 in (813 mm).

• Temperature within the range of 59° to 95°F (15° to 35°C).

• Relative humidity 20 to 80% inclusive, non-condensing.

• Auto-switching single-phase AC Power, 90V~264V AC, 47-63Hz (50-60Hz

nominal); see Electrical specifications on page 157 for power consumption.

Step 7. Remove the Printer from the protective bag.

Caution • The Printer with Laminator weighs approximately 17.9 kg (39.5 lbs). Use two

people to lift it out of the shipping carton.

Important • When moving the printer from storage (23º F/-5º C to 158º F/70º C) to the

operating area (59º F/15º C to 95º F/35º C), allow time to acclimate prior to operation.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 203 204

Sin comentarios

Zebra ZXP Series 1 Manual de usuario Pagina 15