Zebra ZXP Series 1 Manual de usuario descargar pdf (Pagina 180)

172 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002

C: WiFi Connectivity

Description

Communication

To connect to a wireless network, the printer uses wireless protocol IEEE 802.11b/g that

communicates data through radio transmission and can talk to Access Points that are either

802.11b or 802.11g compliant.

The wireless printer communicating over 802.11b radio:

• Allows nominal data rates over the air of 11 Mbps as per 802.11b standard.

• Supports automatic rate scaling starting at 11 Mbps and going down as low as 1 Mbps for

maximum range and optimal throughput depending on signal strength.

The wireless printer communicating over 802.11g radio:

• Allows nominal data rates over the air of 54 Mbps as per 802.11g standard.

• Supports automatic rate scaling starting at 54 Mbps and going down as low as 6 Mbps for

maximum range and optimal throughput depending on signal strength.

Security

The wireless printer supports Open System authentication.

The wireless printer supports the following security features:

• Wired Equivalent Privacy (WEP)

• Wi-Fi protected access (WPA/WPA2)

Encryption

The wireless printer supports the following encryption protocols:

• RC4 (applicable to WEP)

• TKIP (applicable to WPA)

• CCMP (a form of AES encryption applicable to WPA2)

The ZXP Series 7 wireless printer supports the Personal mode of dynamic encryption key

deployment, Personal Shared Key (PSK).

Configuration

You can use a USB or wired Ethernet cable to configure the printer for a wireless network.

The wireless printer can be configured using the Operator Control Panel, the Printer Web Page

(see next page), or the Toolbox application.

1 2 ... 175 176 177 178 179 180 181 182 183 184 185 ... 203 204

Sin comentarios

Zebra ZXP Series 1 Manual de usuario Pagina 180