Zebra Q3DLUBA000002 Manual de usuario descargar pdf (Pagina 44)

• 2-67 • RMAN-QLS-002 rev. A Repair Procedures

LabeL pReSence SenSoR, QL320- an16861-015

Tools Needed

#1 Phillips head screwdriver

3/32” Hex Driver

Remove the Upper Housing

1. Turn the printer off and remove the Battery.

2. Remove the QuickLink Module

3. Remove the Upper Housing, per AN16861-010

4. Open the Media Cover .

Assemble the Sensor Support

Snap the Sensor Support, or the Sensor Assembly into place on the Printer Frame as

shown. Note orientation of sensor widow. If you are installing a Label Presence Sensor

Assembly, proceed to the next step.

You must use an ESD strap and work at a properly grounded workstation (antistatic mat or tray).

All electronic components must be placed on an ESD protective tray. If stored, any elec-

tronic components must be placed in antistatic bags.

For QL 320:Support, Sensor

p/n CA16009-1 or

Label Presence Sensor Assy.

p/n AC16500-1M

For QL 320 Plus-: p/n CL16965-3, Cbl

Flex Crkt Shld Ql4 Lbl Sen,

is supplied with RK18465-003

Note orientation of sensor window

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 108 109

Sin comentarios

Zebra Q3DLUBA000002 Manual de usuario Pagina 44