Zebra II Especificaciones descargar pdf (Pagina 208)

^MM

Print Mode

Description: The ^MM command determines the action the printer takes after a

label or group of labels has been printed. There are four different modes of

operation:

1. Tear-Off – After printing, the label is advanced so that the web is over the tear

bar. Label, with backing attached, can then be torn off manually.

2. Rewind – The label and backing are rewound on an (optional) external rewind

device. The next label is positioned under the printhead (no backfeed motion).

3. Peel-Off – After printing, the label is moved forward and activates a Label

Available Sensor. Printing stops until the label is manually removed from the

printer.

Power peel – backing material is automatically rewound using an

optional internal rewind spindle.

Value peel – Backing is fed down the front of the printer and manually

removed.

Pre-peel – After each label is manually removed, this causes the printer

to feed the next label forward to pre-peel a small portion of the label

material away from the backing material prior to backfeeding and

printing the label. The pre-peel feature assists in the proper peel

operation of some media types.

4. Cutter – After printing, the media feeds forward and is automatically cut into

predetermined lengths.

ZPL II Programming Guide Volume One: Command Reference for X.10

200

1 2 ... 203 204 205 206 207 208 209 210 211 212 213 ... 261 262

Sin comentarios

Zebra II Especificaciones Pagina 208