Zebra Wireless Print Server Guía de usuario Pagina 186
- Pagina / 228
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
SGD Commands for Wireless Operation
wlan.operating_mode
186
14143L-005 Rev. A Wireless User Guide 4/29/08
wlan.operating_mode
Description This printer setting refers to the network operating mode. Infrastructure mode
means that the printer will try to associate with an access point. Ad hoc mode means that the
printer will try to associate with a device other than an access point and join a standalone
network.
Type getvar; setvar
To use "ad hoc" mode configure the printer as follows:
• Set the ESSID to the new network’s ESSID.
• Turn off the DHCP and assign an IP Address to the printer.
• Set the subnet mask on the printer to the new network’s subnet mask.
• Change the operating mode on the printer to "ad hoc".
This table identifies the commands for this format:
Commands Details
getvar
This command instructs the printer to respond with the network-mode
value.
Format: ! U1 getvar "wlan.operating_mode"
setvar
This command instructs the printer to set the network operating mode.
Format: ! U1 setvar "wlan.operating_mode" "value"
Va lues :
"adhoc" = printer will try to associate with a network device
"infrastructure" = printer will try to associate with an access
point
Default: "infrastructure"
Example • This setvar example shows the value set to "infrastructure".
! U1 setvar "wlan.operating_mode" "infrastructure"
When the setvar value is set to "infrastructure", the getvar result is
"infrastructure".
- ZebraNet 1
- Wireless User Guide 1
- Contents 3
- Section Description 10
- Contacts 11
- Document Conventions 12
- About This Document 13
- Introduction 15
- Hardware 16
- Firmware 16
- Access Point 19
- Technologies 20
- Systems 21
- Supported Security Types 22
- Security Type Supported? 23
- Wireless Plus Print Server 25
- = Active Print Server 25
- Wireless Print Server 25
- Configuration 29
- Any Other Wireless Printer 32
- 7. Click Next 33
- PSK Type to String 34
- PSK Name field 34
- Click OK 35
- To... Then 36
- Save Script to a file 37
- Wireless Radio Card 38
- 5. Turn on (I) the printer 39
- 6. Turn on (I) the printer 41
- Wireless Status 43
- Plus (+) for 105SL 44
- Status Indicator Meaning 44
- SIGNAL STRENGTH and 45
- SIGNAL QUALITY 45
- Network Configuration Label 46
- PAUSE/FEED 47
- Function 48
- WIRED PS CHECK? 48
- ^NP ZPL command 49
- PRIMARY NETWORK 50
- LOAD FROM EXT? 50
- ACTIVE PRINTSRVR 50
- IP PROTOCOL 50
- Parameter 51
- RESET NETWORK 52
- Parameter Explanation 53
- Wireless Status and Settings 55
- Troubleshooting 57
- Wireless Error Messages 58
- General Issues 58
- DEFAULT NET 59
- IP Issues 61
- WebView Web Pages 63
- IP ADDRESS 64
- Home Page 65
- View Printer Configuration 66
- 3. Click Submit Changes 67
- 4. Click on the statement 67
- Network Configuration Menu 69
- Print Listings on Label 69
- Media Setup Calibration 70
- ZPL Control Advanced Setup 71
- Network Configuration Screens 72
- SMTP TCP/IP 74
- X60.15.x and ZSPx 74
- Directory Listing 77
- Click Edit 79
- Button Function/Operation 80
- Alert Setup 81
- Printer Controls 84
- Button Function 85
- Print Server Settings 86
- Print Server: 88
- TCP/IP Configuration 88
- TCP/IP Logical Printing Ports 88
- Cancel Job 90
- View Configuration Sheet 91
- View Port Status Contact 91
- ZPL Commands 93
- Parameters Details 100
- Format ~WL 109
- Region Channel Mask 114
- Configure Wireless Securities 115
- Security Type 03: WEP 128-Bit 119
- Security Type 02: WEP 40-Bit 119
- Security Type 04: EAP-TLS 120
- Security Type 05: EAP-TTLS 120
- Security Type 06: EAP-FAST 120
- Security Type 07: PEAP 121
- Security Type 08: LEAP 121
- Security Type 09: WPA PSK 121
- Security Type 10: WPA EAP-TLS 122
- Security Type 13: WPA PEAP 123
- Security Type 14: WPA LEAP 123
- Security Type 15: Kerberos 123
- SGD Wireless Commands 125
- Overview 126
- Do commands: 127
- Command Structure 128
- Commands Details 129
- Security Type 2: WEP 40-Bit 194
- Security Type 3: WEP 128-Bit 195
- Security Type 4: EAP-TLS 195
- Security Type 5: EAP-TTLS 196
- Security Type 6: EAP-FAST 196
- Security Type 7: PEAP 197
- Security Type 8: LEAP 197
- Security Type 9: WPA PSK 197
- Glossary 217
- © 2008 ZIH Corp 228
Relacionado con productos y manuales para Los servidores de impresión Zebra Wireless Print Server
Los servidores de impresión Zebra II Especificaciones
(262 paginas)
(262 paginas)
Los servidores de impresión Zebra 10/100 Guía de usuario
(132 paginas)
(132 paginas)
Los servidores de impresión Zebra II Especificaciones
(412 paginas)
(412 paginas)
Los servidores de impresión Zebra 10/100 Guía de usuario
(162 paginas)
(162 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.025 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales