Zebra Z6Mplus Guía de usuario descargar pdf (Pagina 112)

Routine Maintenance

Cleaning Procedures

104

13163L-001 Rev. A Z4Mplus/Z6Mplus User Guide 1/18/06

To clean the printhead and platen roller, complete these steps:

1. Open the printhead assembly.

2. Remove the media and ribbon.

3. Using the swab from the Preventive Maintenance Kit (part number 47362) or a solution of

90% Isopropyl alcohol and 10% deionized water and a cotton swab, wipe along the brown

strip on the printhead assembly from end to end. Allow the solvent to evaporate.

4. While manually rotating the platen roller, clean it thoroughly with the swab. Allow the

solvent to evaporate.

5. Reload media and ribbon, and close the printhead assembly.

Caution • The printhead may be hot and could cause severe burns. Allow the printhead

to cool.

Note • If performing this procedure does not improve print quality, try cleaning the

printhead with Save-A-Printhead cleaning film. This specially coated material removes

contamination buildup without damaging the printhead. Call your authorized Zebra

reseller for more information.

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 165 166

Sin comentarios

Zebra Z6Mplus Guía de usuario Pagina 112