Zebra Z6Mplus Guía de usuario descargar pdf (Pagina 84)

Configuration

Control Panel LCD Displays

13163L-001 Rev. A Z4Mplus/Z6Mplus User Guide 1/18/06

Select a Sensor

This parameter tells the printer the sensor that you wish to use. AUTO

SELECT is compatible with most types of media. Select the reflective

sensor with continuous media or with non-continuous black mark media;

select the transmissive sensor if you are using non-continuous web media.

Default: AUTO SELECT

Selections: AUTO SELECT, REFLECTIVE, TRANSMISSIVE

To change the value shown:

1. Press SELECT to select the parameter.

2. Press

PLUS (+) or MINUS (-) to scroll through the choices.

3. Press

SELECT to accept any changes and deselect the parameter.

Select Print Method

The print method parameter tells the printer the method of printing that you

wish to use: direct thermal (no ribbon) or thermal transfer (using thermal

transfer media and ribbon).

Default: THERMAL TRANSFER

Selections: THERMAL TRANSFER, DIRECT THERMAL

Note • Selecting direct thermal when using thermal transfer media

and ribbon creates an error condition, but printing continues.

To change the value shown:

1. Press SELECT to select the parameter.

2. Press

PLUS (+) or MINUS (-) to toggle between the options.

3. Press

SELECT to accept any changes and deselect the parameter.

Table 9 • Printer Parameters (Page 4 of 23)

Parameter

Action/Explanation

SENSOR SELECT

-AUTO SELECT +

PRINT METHOD

-THERMAL-TRANS. +

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 165 166

Sin comentarios

Zebra Z6Mplus Guía de usuario Pagina 84