Zebra RW 420 Guía de usuario descargar pdf (Pagina 20)

RW Series User Guide

Loading Media From An External Supply

Note • Only the RW 420 supports an external media supply.

Refer to Figure 10. The RW 420 conﬁgured with the

External Media option has a loading slot in the rear of

the media compartment allowing you to use standard 4

in. (101.6 mm) wide fanfold media from an external sup-

ply. The external supply must be designed such that it

does not exert excessive drag as media is fed through the

printer, which could result in distorted printing.

Zebra offers a series of vehicle cradles for the RW 420

(P/Ns AK17463-003 and AK17463-004) which incorporate

provisions for installation of an external media supply bin.

• Pull the media supports apart, insert a Media Spacer

(Zebra part number BA16625-1) between them, and let

the media supports close. Insert the media from the ex-

ternal supply through the rear feed slot, between the me-

Figure 10: Loading Media from an External Supply

Media Spacer

p/n BA16625-1

Feed media through

bottom feed slot

Printing surface of

media must face the

printhead

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 83 84

Sin comentarios

Zebra RW 420 Guía de usuario Pagina 20