
Introduction
Device Type Printer Wizard
22
13760L-001 Rev. A Zebra Printers and SAP® Smart Forms™ Solution Guide 12/27/10
16. Click the Tab.
Figure 14 opens.
17. In the Spool Administration: Create Output Device window (Figure 14), do the following:
a. Change the Host Spool Access Method to F: Printing from Front End Computer.
b. Type in __DEFAULT as the Host Printer.
This will route the print jobs from your local machine to the default printer installed.
18. If desired, you can check the No Device Selection at Frontend.
No printer selection will be made at print time, so the job will be routed directly to the
default printer.
19. Click (Save).
Figure 14 • Spool Administration: Create Output Device Window
Comentarios a estos manuales