Zebra SAP Smart Forms and Zeberea Print Manual de usuario descargar pdf (Pagina 80)

Advanced Form Design

Smart Forms

13760L-001 Rev. A Zebra Printers and SAP® Smart Forms™ Solution Guide 12/27/10

Smart Forms

Smart Forms was originally developed for Form and Report design, not labels. Smart Forms

can be successfully used to design labels on high performance bar code label printers, but you

need to be aware of the tips and tricks not documented within the original Smart Forms

manuals.

Field Positioning—X, Y Coordinates

Labels normally use a field concept whereas Smart Forms use a Page Window style of design.

Label fields normally have a fixed origin whereas text in forms is much more dynamically

positioned.

Zebra recommends that you make a separate window for each field on the label. Each window

should then have an associated node (text, bar code or logo). Multi-line text fields may all be

tied to a single window. The reason for this is the location of each window specifies the fields

(Nodes) X and Y co-ordinates.

All of these fields must be inside the main windows. please ensure that your main window is

large enough! It is good practice not to associate any nodes with the main window.

Lines and Boxes

Lines and boxes are drawn, as with any Smart Form, via drawing a new window, selecting the

Output Options Tab and then entering a point size for the box and shading options.

Reverse boxes, for text reversing, can be enabled by using the ^LRY command in the printer

settings node S_LZPL_SETUP. See Printer Settings on page 86 for more information.

Note • Ensure that you have the Always draw box and shading checkbox checked in the

Output Options of your windows. The Grey Value must be 0 (hollow) or 100 (solid).

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 95 96

Sin comentarios

Zebra SAP Smart Forms and Zeberea Print Manual de usuario Pagina 80