Zebra T5206R Manual de usuario descargar pdf (Pagina 207)

Emulation Submenus

207

Define CR code

This option controls the action of the printer when it receives a Carriage

Return code (0D hex) from the host computer. If this feature is enabled, each

time the printer receives a carriage return, it inserts an additional Line Feed

code (0A hex) into the data stream. Do not use this feature if the host

computer sends line feeds to the printer.

NOTE: For this menu to take effect in PGL, PGL Normal needs to be set to

PGL Menu.

• CR = CR. Does not insert an extra line feed after each carriage return.

• CR = CR + LF. Inserts an extra line feed after each carriage return. The

next print position will be print position 1 of the next line.

The factory default is CR = CR.

Define LF code (PGL, Serial Matrix, Proprinter XL, Epson FX)

This parameter forces the printer to insert an automatic Carriage Return code

into the data stream whenever a Line Feed code occurs. This can be used in

most installations, but it is required if the host computer does not send

carriage returns to the printer.

NOTE: For this menu to take effect in PGL, PGL Normal needs to be set to

PGL Menu.

• LF = LF. Does not perform an automatic carriage return. The next print

position will be at the current print character position on the next line.

• LF = CR + LF. Performs an automatic carriage return. The next print

position will be print position 1 of the next line.

The factory default is LF = LF.

Define LF code (P-Series, P-Series XQ)

• LF = CR + LF. Forces an automatic carriage return with each Line Feed

command received. The next print position is position 1 of the next line.

• LF = LF. Does not perform an automatic carriage return when a Line Feed

command is received. The next print position will be the current print

position on the next line.

The factory default is LF = CR + LF.

1 2 ... 202 203 204 205 206 207 208 209 210 211 212 ... 393 394

Sin comentarios

Zebra T5206R Manual de usuario Pagina 207