Zebra ZXP Series 1 Manual de usuario Pagina 109

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 116
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 108
CardSense
TM
Single Card Feed Mode
P1032297-001 Rev. A Zebra ZXP Series 3 Card Printer User’s Manual 105
Printing a Single Card
Step 1. Cards are inserted one at a time into the slot on the front of the printer. Do not feed
more than one card at a time. Note that the card must be fully inserted before printer
turns on and accepts the card.
Step 2. The card is printed.
Step 3. The printed card is ejected out through the same (input) slot.
ZXP Series 3
INSERT CARD
Note • If single-card feeding will be the normal mode of operation, you may select that
mode through the driver software. In single card feed mode, the card will not be printed until
the print job has been sent to the printer and the card to be printed has been inserted into the
single card feed slot
Vista de pagina 108

Comentarios a estos manuales

Sin comentarios