Zebra ZXP Series 1 Manual de usuario descargar pdf (Pagina 50)

46 Zebra ZXP Series 3 Card Printer User’s Manual P1032297-001 Rev. A

Printer Settings and Adjustments

Card Printer Properties

Tools

Dialog box for testing and communicating with the printer.

• Command to send to printer - Enter a printer command (without leading escape

character) in the top edit box, and click on the Execute button to send to the printer

directly. The Printer Status will show the status of the printer. Contact Zebra Technical

Support for a complete list of the printer commands.

• Print Test Card - Three test card types are available: Standard, Printer Parameters, and

Encoder Parameters. Click on the Print button to print the test card.

• Clean - Printer only is the only cleaning option. Click on the Clean button to clean the

printer. Remove all consumables before executing a cleaning cycle.

• Offset Setting - Enter the Front and Back X and Y direction offsets, and click on the

Set Offsets button to set the offsets for printing the card.

• Direct Encoding - To encode magnetic data on a track, select the track (Track 1, Track 2,

or Track 3); enter the data to encode; and click on the Encode button. To read magnetic

data, select the track(s) to be read; and click on the Read button. To eject the card from the

printer, click on the Eject Card button.

• Send File - This command will allow a .prn or .txt file to print.

- The .prn file must be created with a Zebra printer driver using the same ribbon as

present in the printer.

- The .txt file must contain firmware commands only with only one command per line.

The first line must only contain MASTER; the last line must only contain SLAVE.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 115 116

Sin comentarios

Zebra ZXP Series 1 Manual de usuario Pagina 50