Zebra ZXP Series 1 Manual de usuario descargar pdf (Pagina 66)

62 Zebra ZXP Series 3 Card Printer User’s Manual P1032297-001 Rev. A

Troubleshooting

Troubleshooting Procedures

LCD Panel Warnings and Error Messages

The following tables show causes and solutions to symptoms related to improper operation.

Check the table when experiencing any loss of operation or print quality.

PANEL WARNINGS (printer will still operate)

Note: If the problem persists, contact Technical Support; see Worldwide Support on page 109.

Problem / Symptom Description or Cause Possible Solution

Note

CHECKING RIBBON Printer is determining type of ribbon

installed.

No action required -- status message

only.

CLEAN PRINTER Printer cleaning required. Refer to Cleaning the System on

page 57.

CLOSE LID The lid is open. Make sure that the lid is completely

and securely closed.

ENCODING ERROR May be incorrect card type. Check that you are using the correct

magnetic card type (for low or high

coercivity encoding).

FLASH ERROR A flash error occurred. Reset the Printer, and try printing the

card again.

INVALID MAGNETIC DATA The magnetic data may be invalid. Check data format.

READING ERROR A reading error occurred. Reset the Printer, and try printing the

card again.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 115 116

Sin comentarios

Zebra ZXP Series 1 Manual de usuario Pagina 66