Zebra ZXP Series 1 Manual de usuario descargar pdf (Pagina 34)

30 Zebra ZXP Series 3 Card Printer User’s Manual P1032297-001 Rev. A

Printer Setup

Loading Cards

To help you load, print, and collect cards, the printer has a card feeder and card output hopper.

Card Feeder

The card feeder is used for loading cards, it can hold up to 100 cards of 30 mils thickness. The

card feeder is located under the card feeder cover of the Printer

Load cards into the card feeder as follows:

1. Open the card feeder cover.

2. Slide the card guide all the way to the right until it locks in place with an audible click.

Caution • DO NOT bend cards or touch print surfaces as this can reduce print quality.

Note • The surface of the cards must remain clean and dust free. Always store cards in an

enclosed container. Ideally, use cards as soon as possible. If cards stick together, carefully

fan or shuffle them.

Note • For Cards with magnetic stripe, refer to Appendix B for loading instructions.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 115 116

Sin comentarios

Zebra ZXP Series 1 Manual de usuario Pagina 34