Zebra ZXP Series 1 Manual de usuario descargar pdf (Pagina 94)

90 Zebra ZXP Series 3 Card Printer User’s Manual P1032297-001 Rev. A

Magnetic Encoder Option

Driver Settings

Encoder Settings

The Encoder Settings dialog box is used for setting various Magnetic Encoder parameters.

This feature is not enabled if the printer does not have the magnetic encoder option.

To access the Encoder Settings dialog box, select Start > Settings > Printers and Faxes. Right

click on the Zebra ZXP Card Printer listing; then select Properties > Device Settings >

Encoder Settings.

• Enable macro processing - This option will allow you to choose the encoding preamble.

• Start of data - Beginning of the data string for the encoder. Note that Start of Data

characters must be immediately followed by a one-digit number representing desired track

where the data will be written. Use the normal Windows default fonts.

• End of data - Ending of the data string for the encoder.

• HiCo/LoCo - Select the type of coercivity of magnetic stripe cards to be used. Coercivity

is a measurement of a material's resistance to being magnetized. Low coercivity material

magnetizes easier than high coercivity material.

• Encoder position - Select the printer encoder position between Reversed and Normal.

Reversed is not supported by this printer.

• Encoder type - Select the type of encoder. JIS2 and AAMVA are not supported by

this printer.

Click on the Advanced Settings button for additional encoding options; see Advanced

Settings on page 91.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 115 116

Sin comentarios

Zebra ZXP Series 1 Manual de usuario Pagina 94