Zebra TTPM3 Especificaciones descargar pdf (Pagina 101)

100

Specifications

Document Stock

01/06/2009 TTPM3 Installation and Programming Manual P1003642-001

Coating and Preprint

Thermal-print to Preprint Alignment

Tolerances in the printer, and in the ticket stock itself, can cause misalignment between the

preprint of the ticket stock and the thermal print. The ticket guides in the printer are set at

54.3 mm. Narrower guides would cause paper jam when the relative humidity changes the

ticket width.

A ticket width of 54.0 ± 0.2 mm gives a maximum misalignment of 0.55 mm (54.3 + 0.05 –

(53.3 – 0.2)).

Magnetic Media

Thermal coating Shall meet or exceed the ANSI 3.11 specification.

Smoothness: Max. 75 Sheffield units

Properties: Same as fax grade 3

Top coating The thermo-sensitive surface of the document stock can be

provided with a protective UV or moisture proofing top coating.

Preprint Tickets can be preprinted on one, or both sides.

Ink for thermo-sensitive side: Laser printer approved ink with-out

whiteners.

Ink for magnetic stripe side: Offset ink

Caution • Never use abrasive inks as they reduce the life of the thermal print head.

Note • Avoid designing tickets that require close alignment between preprint and thermal

print.

Magnetic stripe Side stripe positioned according to ISO 7811/2

Center stripe (option)

Magnetic media Full tape, transfer tape or slurry

Coercivity Adjustable between 300 and 3500 Oersted

Factory set to:

LoCo: 300 Oersted

HiCo: 2750 Oersted (option)

Non-standard coercivity setting available on request

Caution • In case of slurry, care must be taken to avoid excess slurry material and

abrasive particles that may cause unduly high degree of wear on the magnetic recording

and read heads in the TTPM3.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 111 112

Sin comentarios

Zebra TTPM3 Especificaciones Pagina 101