Zebra ZM400 Guía de usuario descargar pdf (Pagina 22)

Installation

External 10/100 PS

47619L-006 Rev. A ZebraNet

10/100 Print Server User Guide 02/01/2011

External 10/100 PS

This section provides you with an illustration of the external 10/100 PS and the steps required

for its installation. For a list of compatible printers, see Hardware on page 15.

Before You Begin

To upgrade you printer firmware, complete these steps:

1. If your printer has firmware x.12 firmware, you must upgrade your printer firmware to

version x.14.x or higher.

2. To upgrade your firmware, visit the Zebra Web site:

www.zebra.com/firmware

3. Confirm that the upgrade was successful:

Important • In order to take advantage of all features described in this manual, you must

download firmware X.14 or later.

Note • Not all printers support firmware X.14 or later. On those printers, the features

for this print server will be limited.

If... Then...

Your printer has an LCD Look at the lower right-hand corner and confirm the

version of firmware that is on your printer.

Your printer does not have

an LCD

Print out a configuration label to see the version of

firmware that is on your printer.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 115 116

Sin comentarios

Zebra ZM400 Guía de usuario Pagina 22