Zebra ZM400 Guía de usuario Pagina 28

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 116
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 27
Getting Started
Before You Begin
28
47619L-006 Rev. A ZebraNet
®
10/100 Print Server User Guide 02/01/2011
Before You Begin
10/100 PS offers many features, but how you access and work with them is dependent on your
environment.
Default User ID and Password
Throughout the procedures in this document, there are some features that require the default
User ID and/or default password. If you are prompted, these are the defaults:
User ID:
admin
Password: 1234
Printing a Configuration Label
Before you begin, you need to get information from the 10/100 PS configuration label.
In order to print the 10/100 PS configuration label, the correct media size must be loaded in the
printer. For specific information on media sizes, see Table 1 on page 25.
To print a 10/100 PS configuration label, complete these steps:
1. Turn on (I) the printer and let it complete its power-up cycle.
2. When the POST cycle is complete, press the Test button and hold it in for a few seconds
before you release it.
A 10/100 PS configuration label prints. Your configuration label looks similar to Figure 6
on page 29.
Important • Make sure the printer is turned off (O).
Vista de pagina 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 115 116

Comentarios a estos manuales

Sin comentarios