Zebra ZM400 Guía de usuario descargar pdf (Pagina 30)

Getting Started

Assigning an IP Address

47619L-006 Rev. A ZebraNet

10/100 Print Server User Guide 02/01/2011

Assigning an IP Address

Before you can begin working with 10/100 PS, you must get or assign an IP address for the

10/100 PS device.

The four different ways to assign an IP address are:

• ZebraNet Bridge

•DHCP

•Printer LCD

•Telnet

With Dynamic Host Configuration Protocol (DHCP)

If your network uses DHCP, your 10/100 PS device is assigned a temporary IP address.

Without DHCP

If your network does not use a dynamic IP addressing system (such as DHCP), you need to set

a permanent IP address for the 10/100 PS device. ZebraNet Bridge may be used to set the IP

address.

Important • For specific information on the default User ID and/or default password, see

Default User ID and Password on page 28.

Note • Check with your Network Administrator to see whether your network uses DHCP.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 115 116

Sin comentarios

Zebra ZM400 Guía de usuario Pagina 30