Zebra ZM400 Guía de usuario descargar pdf (Pagina 77)

77

10/100 Print Server

10/100 PS Features

02/01/2011 ZebraNet

®

10/100 Print Server User Guide 47619L-006 Rev. A

TCP/IP Configuration

You can change the TCP/IP configuration of

the 10/100 PS.

• IP Address:

Use this feature to set the IP

address if using the Permanent addressing

method.

• IP Address Resolution: Use this feature to

select the addressing method to use (Dynamic

or Permanent).

• Dynamic Protocols: Use this feature to

select the Dynamic Addressing method to use

at startup. Choices include RARP, BOOTP,

DHCP, Gleaning or Default Address.

• Subnet Mask: Use this feature to set the

subnet mask. The subnet mask must follow

the format XXX.XXX.XXX.XXX, where

each XXX is a number between 0 and 255.

• Default Gateway: Use this feature to set the

default gateway. This gateway will be used

whenever messages need to be sent to another

network. This gateway address must follow

the format XXX.XXX.XXX.XXX, where

each XXX is a number between 0 and 255.

• WINS Server IP Address: Use this feature

to set or view the IP address of the WINS

Server.

• Connection Timeout Checking: Use this

feature to enable or disable the Connection

Timeout feature. The timeout is used to close

network TCP/IP connections that are idle for

more than the number of seconds entered in

the Timeout Value.

• Timeout Value (secs): Use this feature to set

the Connection Timeout Value. The Valid

range is 10 to 3600 seconds. The default is

300 seconds.

• ARP Broadcast Interval (mins): Use this

feature to set interval for sending an ARP

Broadcast. The valid range is 1 to 30 minutes.

Address Resolution Protocol (ARP) broadcast

packets allow other network devices to

associate the print server's IP Address with its

hardware address.

• Base Raw Port Number: Use this feature to

set the raw TCP port that the print server will

use for printing tasks. The default is port 9100.

Table 4 • Menu Options (Continued)

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 115 116

Comentarios a estos manuales

Sin comentarios