Zebra KR403 Especificaciones descargar pdf (Pagina 23)

Introduction

Installing the Media Guide (Required Accessory)

12/23/2009 KR403 Integrators Guide P1016701-001

Installing the Media Guide (Required Accessory)

The media guide configures the printer to one of four (4) common roll paper widths: 58, 60,

80, or 82.5 mm. The printer senses which media guide is installed and adjusts the default print

width to match it automatically: narrow (58 or 60 mm) or wide (80 or 82.5 mm). The printer is

delivered without a paper guide installed.

1. If the printer has power connected or is installed in a system, always disconnect the

printer from power. Pinch the top and bottom of the printer’s power connector to release

the power plug’s latch and pull the plug away from the printer.

Caution • Before proceeding, always disconnect the printer from power. If the printer is

installed in the kiosk, then all kiosk power should be turned off. This is to prevent

accidentally having the screw or media guide bracket fall into the printer or other

powered up kiosk components. The screw or bracket may fall and bounce into kiosk

components mounted adjacent to or mounted below the printer.

Printer Power

Connector and

Plug with Latch

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 119 120

Sin comentarios

Zebra KR403 Especificaciones Pagina 23