Zebra KR403 Especificaciones descargar pdf (Pagina 54)

Operation

Printing a Test (Printer Configuration) Receipt

P1016701-001 KR403 Integrators Guide 12/23/2009

Printing a Test (Printer Configuration) Receipt

Before you connect the printer to your computer, make sure that the printer is in proper

working order.

You can do this by printing a configuration receipt.

1. Make sure the media is properly loaded and Ready with the printhead closed. Then, turn

the printer power on if you have not already done so. If the printer initializes with the

status light blinking green (pause mode), press the Feed button once to set the printer in

Ready (to print) mode.

2. Press the Feed button to print, present and removal of receipts two to three times to allow

the printer to calibrate the printer for the installed media. The printer may feed several

extra receipts during this process if media calibration needs to be adjusted (this is an

automatic printer feature).

3. When the status light is solid green, press and hold the Feed button until the status light

flashes once.

4. Release the Feed button. A printer configuration receipt will print (example below)

The configuration status receipt will print as two or more receipts if the receipt size is not large

enough to contain all of the status information as shown above.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 119 120

Sin comentarios

Zebra KR403 Especificaciones Pagina 54