Zebra KR403 Especificaciones descargar pdf (Pagina 93)

Kiosk Hardware Integration Accessories

Universal Roll Holder

12/23/2009 KR403 Integrators Guide P1016701-001

Universal Roll Holder

This roll holder can be fitted on the right or left side of the printer. The arm can be set at three

different angles. This makes make integration in the kiosk easy.

• 58 mm, 60 mm, 80 mm, and 82.5 mm media widths can be used without adjustments.

• The universal roll holder supports up to Ø200 mm rolls in the ‘high’ and ‘low’ arm

positions, and Ø250 mm rolls in the ‘under’ position with clearance for cabling.

• No other accessories are required for the ‘high’ arm position, while the Printer

Mounting Plate with the inertia dampening spring guide and cable shield is needed in

the two other positions.

• The optional media roll low sensor can be added to the roll support.

Mounts on

either side

Mounts on

either side

200 mm Roll

and ‘Low’ Roll

Support

Position Shown

High and Low - 150 mm max.roll

Under 200 mm max.roll

Arm Positions

High and Low - 200 mm max.roll

Under - 250 mm max.roll

Arm Positions

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 119 120

Sin comentarios

Zebra KR403 Especificaciones Pagina 93