Zebra KR403 Especificaciones descargar pdf (Pagina 38)

Controls

Sensing, Status and Error Reporting

P1016701-001 KR403 Integrators Guide 12/23/2009

Status conditions are reset and rechecked when:

1. When the conditions causing them are removed

2. When the printer has power removed and reapplied.

3. When the printhead is opened or closed.

Sensing, Status and Error Reporting

The KR403 has an extensive array of sensing and error reporting capability available to the

printer for internal process control, status reporting to the host and custom printer software

development by the software integrator. Many of these features and functions are supported

directly by the Windows Driver and Zebra Designer via the driver.

• The printer monitors the printhead, motors, cutter and a variety of internal main board

functions.

• The KR403 printer has a variety of ‘virtual sensor and error flags’ that use

combinations of sensors and status flags to create additional error reporting flags to

simplify the software integrators task of monitoring the printer.

• The KR403 printer also has an odometer for maintenance alerts for printhead cleaning

and printhead low life warning (printhead will need replacement soon). This feature is

off by default.

• The KR403 printer also does power-up printhead testing, printhead critical fault

testing for safety and has a programming accessible printhead pixel test that reports

the functionality of individual pixels. This feature is off by default.

The following tables and illustration shows an excerpt from ZPL programmers manual of the

the error tables for the

^HQ status report. Please see the ZPL programmers guide for more

details and related commands.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 119 120

Sin comentarios

Zebra KR403 Especificaciones Pagina 38