Zebra RW SERIES Especificaciones Pagina 29
- Pagina / 114
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
• 2-29 • RMAN-RWS-001 rev. B • RW Series Repair Procedures
Preparation
1. Turn the printer off and remove the battery pack.
2. Remove the Upper Housing. Refer to Procedure RK1793-008/RK18280-1 for
more details. It is not necessary to unplug the Keypad or the LCD from the
CPU Board.
3. Unplug the Printhead, Gap and Bar Sensor Cables from the CPU Board.
4. Remove the Mounting Screws from the CPU Board. Push in the latch release
button and pull the CPU Board away from the Printer to allow access to the
Printhead connector.
Refer to the procedure for RK17393-020 for more details on removing the CPU Board)
Installation Instructions
This kit includes the parts and documentation necessary to install the RK17393-006
Motor Kit, RW 420 in the RW 420 model printer. Read these instructions
thoroughly before attempting to install this kit.
The operator must wear a properly grounded ESD strap to perform the following
repair procedure.
Reference Materials
UMAN-RWS RW Series Users’ Guide
Tools Required
#0 or #1 Phillips Head Screw Driver
Cautions
Thisinstallationmustbeperformedonlybyaqualiedservicetechnician.
Unless otherwise specied:
• Always turn the printer off
• Remove the battery before installing any Replacement Kits.
continued on next page
Replacement Kit RK17393-006- RW 420 Motor
- RW Series 1
- RMAN-RWS-001 rev.B • -ii • 2
- Contents 3
- RMAN-RWS-001 rev.B • -iv • 4
- Description 5
- Operating Modes 5
- Printing Technology 5
- Communications 5
- User Guide 5
- Diagnostic Tools 9
- Diagnostic Label Printout 9
- Label Vista™ 9
- Factory Technical Support 9
- Printing a Diagnostic Label 10
- Creating a Configuration Label 10
- Sample Configuration Label 10
- Introduction to Label Vista™ 13
- Starting Label Vista 13
- Equipment Required 14
- Running The Software 14
- Tools and Supplies 15
- Handling 15
- Storage and Handling 15
- • 2-16 • 16
- Unplug the Bar 16
- Sense Cable 16
- Peel the old Bar Sense 17
- Cable away from the 17
- • 2-20 • 20
- into place as 20
- • 2-22 • 22
- Installing the Media Assembly 23
- CPU CONNECTIONS 24
- Removing the Printhead 26
- Installing the Printhead 27
- Removing the Motor 30
- • 2-32 • 32
- • 2-34 • 34
- • 2-36 • 36
- Unplug LCD and Keypad flex 36
- Separate the Assemblies 37
- • 2-38 • 38
- Remove and retain Card 38
- Reader Assembly and 38
- Keypad and Housing Assembly 40
- Remove the Card Reader 41
- Install the Card Reader 42
- Kit p/n Description 45
- RK17393-029 Radio 802.11g Kit 45
- Remove the Radio Assembly 46
- • 2-48 • 48
- Replace the Belt Clip 52
- Clip, D-Ring 53
- Removing the “D” Rings 54
- Installing the “D” Rings 54
- Remove the Connector Door 56
- Install the Connector Door 56
- • 2-60 • 60
- Install the Base Plate 62
- Finish the Installation 62
- Unplug the 63
- Bar Sense 63
- Cable from J2 63
- • 2-64 • 64
- 10. Calibrate the Sensors 66
- • 2-72 • 72
- Changing the Media Core Size 73
- • 2-74 • 74
- • 2-78 • 78
- • 2-84 • 84
- 802.11b Antenna PCB Assembly 87
- Bracket, Radio (Card version 87
- • 2-88 • 88
- Radio PCB Assembly 88
- • 2-92 • 92
- Install the Upper Housing 96
- Removing the Controller Board 98
- Controller Board 100
- Test the Printer 101
- IN THE USA IN EUROPE 103
- RW Series Accessories 104
- PCC Example 106
- RW 420 Accessory Kits 107
- RW 420 Replacement Kits 107
- REPLACEMENT 109
- AK17463-005 109
- ITEM PART # DESCRIPTION 110
- RW 220 Accessory Kits 111
- RW 220 Replacement Kits 112
- 12 3 5 8 113
Relacionado con productos y manuales para Impresión y escaneo Zebra RW SERIES
Impresión y escaneo Zebra P430i Manual de usuario
(68 paginas)
(68 paginas)
Impresión y escaneo Zebra 3742 Manual de servicio
(56 paginas)
(56 paginas)
Impresión y escaneo Zebra QLn220 Manual de usuario
(12 paginas)
(12 paginas)
Impresión y escaneo Zebra RP4T Manual de usuario
(6 paginas)
(6 paginas)
Impresión y escaneo Zebra 10/100 Manual de usuario
(116 paginas)
(116 paginas)
Impresión y escaneo Zebra P320i Guía de usuario
(66 paginas)
(66 paginas)
Impresión y escaneo Zebra EPL2 Especificaciones
(248 paginas)
(248 paginas)
Impresión y escaneo Zebra EM220II Manual de usuario
(37 paginas)
(37 paginas)
Impresión y escaneo Zebra 105SL Plus Guía de usuario
(174 paginas)
(174 paginas)
Impresión y escaneo Zebra TTP2130 Especificaciones
(138 paginas)
(138 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.190 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales