Zebra RW SERIES Especificaciones descargar pdf (Pagina 79)

• 2-79 • RMAN-RWS-001 rev. B • RW Series Repair Procedures

Removing the Motor

1. Remove the Printer Frame and Media Cover Assembly from the Lower Housing.

2. Unplug the Motor connector (J6) from the bottom side of the CPU Board

3. Remove the Motor from the Printer Frame by removing its mounting Screw and

twisting the motor away from the frame.

Installing the Replacement Motor

1. Insert the Motor’s pinion gear through the hole in the Printer Frame. Mesh it

with the gears on the side of the Printer frame. Rotate the motor into place on

the Printer Frame as shown and secure it with the Screw supplied with the kit .

2. Reassemble the Printer Frame and Media Cover back into the Lower Housing.

3. Secure the Printer Frame to the Lower Housing with (4) Screws as described

in RK17949-007. Ensure that none of the sensor cables or the motor cables

are pinched between the Printer Assembly and the Bottom Cover Prior to

assembly.

continued on next page

Motor

p/n BT16601-2

(Included with RK17949-006)

Screw Self-Tap M3 x 6

p/n TH-PTA023008-5

(Included with RK17949-006)

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 113 114

Sin comentarios

Zebra RW SERIES Especificaciones Pagina 79