Zebra RW SERIES Especificaciones descargar pdf (Pagina 32)

RMAN-RWS-001 rev. B • RW Series Repair Procedures • 2-32 •

Removing the Printer Frame

1. Remove the Upper Housing. Refer to Procedure RK17393-008/RK18280-1 for

more details.

2. Remove the CPU Board. Refer to Procedure RK17393-020 for more details.

3. Remove the (4) Screws that secure the Printer Frame to the Lower Housing

and remove the Printer Frame and Media Cover.

4. Remove and retain the following from the Printer Frame:

• Media Cover Assembly (ref. RK17393-001)

• Media Guide Assembly (ref. RK17393-003)

• Printhead Assembly (ref. RK17393-005)

• Motor.

Install The New Printer Frame Assembly

1. Assemble the Media Assembly onto the new Printer Frame: Refer to

RK17393-003 for more details on installing the Media Assembly.

2. Assemble the Media Cover Assembly to the Printer Frame. Follow the

procedure for reinstalling the Media Cover Assembly per RK17393-001.

• Ensure the Hinge Pin passes behind the Sensor cable.

• Press the Sensor cable rmly into its channel in the bottom of the Printer

Frame.

Replacement Kit RK17393-007- RW 420 Printer Frame

Installation Instructions

This kit includes the parts and documentation necessary to install the RK17393-007

Printer Frame Kit, RW 420 in the RW 420 model printer. Read these instructions

thoroughly before attempting to install this kit.

The operator must wear a properly grounded ESD strap to perform the following

repair procedure.

Reference Materials

UMAN-RWS RW Series Users’ Guide

Tools Required

#0 or #1 Phillips Head Screw Driver

Cautions

 Thisinstallationmustbeperformedonlybyaqualiedservicetechnician.

Unless otherwise specied:

• Always turn the printer off

• Remove the battery before installing any Replacement Kits.

• Remove any media installed in the Printer

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 113 114

Sin comentarios

Zebra RW SERIES Especificaciones Pagina 32