Zebra 170PAX2 Series Guía de usuario descargar pdf (Pagina 21)

Control Panel Indicator LEDs

LEDs on the front panel are a quick indication of the print engine’s status (see Figure 7

on page 18).

Table 2: Control Panel LED Description

LED Status Indication

POWER Off The print engine is off or power is not applied.

On The print engine is on.

ERROR Off Normal operation — no print engine errors.

Flashing A print engine error exists. Check the display screen for more information.

RIBBON Off Normal operation — ribbon (if used) is properly loaded.

On Printing is paused, the front panel displays a warning message, and the PAUSE light is

on.

• If the print engine is in direct thermal mode: Ribbon is loaded.

• If the print engine is in thermal transfer mode: No ribbon is loaded.

MEDIA Off Normal operation — media is properly loaded.

On No media is under the media sensor. Printing is paused, the display shows an error mes-

sage, and the PAUSE light is on.

DATA Off Normal operation. No data being received or processed.

On Data processing or printing is taking place. No data is being received.

Flashing The print engine is receiving data from or sending status information to the host com-

puter. Flashing slows when the print engine cannot accept more data, but returns to nor-

mal once data is again being received.

PAUSE Off Normal operation.

On The print engine has stopped all printing operations. Either the PAUSE key was

pressed, a pause command was included in the label format, the on-line verifier detected

an error, or a print engine error was detected. Refer to the display screen for more infor-

mation.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 99 100

Sin comentarios

Zebra 170PAX2 Series Guía de usuario Pagina 21