Zebra 170PAX2 Series Guía de usuario descargar pdf (Pagina 32)

100

DATA BITS

Setting Data Bits Press the RIGHT or LEFT BLACK OVAL key to display

other choices.

Default: 7-bits

Selections: 7-bits, 8-bits

The data bits of the print engine must match the data bits of the host for accurate

communications to take place. Set the data bits to match the setting being used

by the host.

NOTE: Must be set to 8 data bits to use Code Page 850.

PARITY

Setting Parity Press the RIGHT or LEFT BLACK OVAL key to display

other choices.

Default: Even

Selections: Even, odd, none

The parity of the print engine must match the parity of the host for accurate

communications to take place. Select the parity that matches the one being used

by the host.

STOP BITS

Setting Stop Bits Press the RIGHT or LEFT BLACK OVAL key to display

other choices.

Default: 1 stop bit

Selections: 1 stop bit, 2 stop bits

The stop bits of the print engine must match the stop bits of the host for accurate

communications to take place. Select the stop bits that matches the one being

used by the host.

HOST HANDSHAKE

Setting Host Handshake Press the RIGHT or LEFT BLACK OVAL key to

display other choices.

Default: XON/XOFF

Selections: XON/XOFF, DTR/DSR

The handshake protocol of the print engine must match the handshake protocol

of the host for communications to take place. Select the handshake protocol that

matches the one being used by the host.

PROTOCOL

Setting Protocol Press the RIGHT or LEFT BLACK OVAL key to display

other choices.

Default: None

Selections: None, Zebra, ACK/NACK

Protocol is a type of error checking system. Depending on the selection, an indi-

cator may be sent from the print engine to the host signifying that data has been

received. Select the protocol that the host requests. Further detail on protocol

can be found in the ZPL II Programming Guide Volume I.

NOTE: Unlike ACK/NACK, Zebra response messages are sequenced.

NOTE: If Zebra is selected, the print engine must use “DTR/DSR” host

handshake protocol.

Table 3: Configuration and Calibration Description (Continued)

Press Display Shows Action/Explanation

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 99 100

Comentarios a estos manuales

Sin comentarios

Zebra 170PAX2 Series Guía de usuario Pagina 32

Comentarios a estos manuales

Relacionado con productos y manuales para Impresión y escaneo Zebra 170PAX2 Series